Academy · SealMaster how-tos · Equipment

Outlined from SealMaster

Selecting Sealcoating Equipment for Long-Term Growth

Size the machine to the work: platform, spray or squeegee, tank, pump, and haul.

Outline

1. What You'll Learn

   Start from the jobs you run, then pick a platform and an application method, then tank and pump. Price is last.

2. Assessing Job Requirements and Application Scope

   Lot size, how many jobs a day, and whether you spray or squeegee come before any brand comparison.

3. Defining Operational Needs Before Equipment Selection

   Daily use, crew size, and where the machine sleeps should be written down before you shop.

4. Equipment Platforms and System Configurations

   Portable, skid, trailer, and truck change capacity and how you haul. They are not the same machine on different wheels.

5. Portable Systems

   Lowest capacity, moved by hand or a light vehicle. The article aims them at small work.

6. Skid-Mounted Systems

   Sit in a truck bed and come out when the truck is needed for something else. Shared vehicles are the reason.

7. Trailer-Mounted Systems

   More material and their own tow. The step up when a skid refill is costing the day.

8. Truck-Mounted Systems

   Permanent on the truck, highest capacity. The article reserves these for crews whose production justifies a dedicated vehicle.

9. Primary Categories of Sealcoating Equipment

   Spray, squeegee, or a combination machine. The category has to match the method you actually sell.

10. Spray Application Equipment

    Built for even coverage and speed on larger pavement. A spray system that cannot carry sand is the wrong spray system.

11. Squeegee Application Equipment

    Usually a ride-on that works material into the surface. Choose it for that contact, not because it looks simpler.

12. Combination Spray and Squeegee Equipment

    Both methods on one machine so the first coat can be squeegeed and the second sprayed without a second unit.

13. Tank Capacity and Production Efficiency

    A larger tank means fewer refill trips. A smaller tank is easier to maneuver and to keep full of fresh mix. Match it to the route.

14. Pump Systems, Agitation and Material Handling

    The pump has to move sealer with sand. Agitation has to keep that sand up. Those two features decide whether the mix on the pavement matches the mix in the tank.

15. Transportation, Jobsite Access and Equipment Mobility

    If the machine cannot get to the job or through the gate, capacity does not matter. Haul and access are part of the spec.

16. Cost Considerations and Long-Term Equipment Value

    The close asks you to weigh purchase price against production, downtime, and how many seasons the machine stays in the fleet.