Academy · SealMaster how-tos · Color coatings

Outlined from SealMaster

Applying Asphalt Color Coatings

Surface prep, weather, acrylic crack fill, mix, and two coats. Ratios stay on the source page.

Outline

1. What You'll Learn

   The contents list is the field order: prep, weather, cracks, mixing, application, coverage, mistakes, and how the color is supposed to hold up.

2. Step 1: Surface Preparation

   The pavement has to be dry, sound, and free of dirt, dust, and oil. Edgers, brooms, blowers, and crack cleaners are the tools named. A pressure washer is only for the worst dirt.

3. Step 2: Check Weather Conditions

   Apply only when it is above 50°F and will stay there for a day, with no rain in the forecast. The article treats a cold or wet window as a failed coat.

4. Step 3: Repair All Cracks

   Fill cracks with an acrylic filler and let it cure before color. The guide says not to put hot-applied crack filler under these acrylic color systems.

5. SealMaster Recommended Crack Fillers

   CrackMagic and CourtFlex are called out as neutral acrylic repairs so they do not print through the color. Acrylic Crack Patch is the third option in this section.

6. Acrylic Crack Patch

   A ready-to-use acrylic filler for cracks up to about an inch and for small depressions. Work it in, wipe the excess, and stay inside the temperature window.

7. CrackMagic

   An acrylic elastomeric sealant for asphalt or concrete cracks. Fill flush, feather the edges, and let it dry before color or traffic.

8. CourtFlex

   A pourable elastomeric filler, especially for recreational pavement, for cracks up to about a half inch. Keep it at or slightly below the surface and squeegee the excess.

9. Step 4: Mixing Ratios

   ColorPave Neutral Concentrate is mixed on site with water, pigment, and sand. The article prints the batch figures. Use those figures from the source page, not a remembered mix.

10. ColorPave Neutral Ready-Mix

    The ready-mix already carries sand. Pigment is added to the pail, and water only if the material needs to move. Exact additions are on the source page.

11. Step 5: Applying the Color Coating

    Squeegee is the standard place, spray for large even areas, and a roller or brush for edges. Keep coats thin, keep a wet edge, and stir so the sand does not settle.

12. Step 6: Coverage Guidelines

    Porous pavement drinks the first coat. The guide calls for two coats of either concentrate or ready-mix, with the first coat dry before the second.

13. Common Mistakes to Avoid

    Skipping prep, ignoring the 50°F and rain limits, using hot crack filler, guessing the mix, laying the color unevenly, stopping at one coat, opening too soon, or coating over coal tar or a non-acrylic sealer.

14. Ensuring Long-Term Performance

    Color, safety, and a clean layout only last if each earlier step was actually done. The article's close is process, not a new product.

15. Learn More About Colorized Coatings

    The source links onward to the overview of where color coats are used. That overview is the next lesson in this track.